Wheel blast, air blast, and dust collector service contracts — inspection, training, parts, and 24/7 BSI-powered support. From a single machine to a full facility.
Any machine, any brand, anytime. We service, rebuild and install wheel blast and air blast equipment, and we are independent enough to tell you when a rebuild beats a new machine. Pick your stage.
Order on your schedule instead of paying emergency freight after a blade lets go.
Same price online or through a BSI job. Every inspection report comes with a prioritized parts list.
Service contracts built on numbers: wheel amp efficiency, operating mix, blast pattern and airflow.
Our field reports have found wheel machines throwing as little as 30–35% of their rated abrasive. That is lost production you already paid for.
The cabinet, frame and conveyor usually outlive the wear parts by decades. We rebuild what wore and upgrade what aged.
Every rebuild starts with a written assessment: what to rebuild, what to upgrade, and what it costs against a new machine.
We spec the machine your process needs, install it, start it up, and prove it performs before we leave.
Every install ends with a start-up air study and leak test, documented in writing.
Not sure which lane you are in? Snap the machine and its nameplate. Joe looks at every photo personally and you get a straight answer on parts, service, rebuild or replace, usually the same day.
Pick your equipment and the symptom. You get the likely causes, ranked in the order a field tech would check them, in about ten seconds. Free with a quick sign-up.
Your diagnosis is pre-filled in the message. Nothing is sent until you hit send.
Tap Talk and describe it like you would on the phone. Joe reads every one and gets back to you.
24/7 Support around the clock. VIP Service Contract customers get 24/7 troubleshooting with a 2-hour acknowledgment, built from their own machine manuals. Ask about VIP →
Leak testing, filter replacement and pulse-system service for cartridge and baghouse collectors on blast, weld fume, plasma, paint and foundry lines. These are real photos from our service calls.
Fluorescent powder goes in upstream, then the clean side gets checked under UV light. Any dust that bypasses a filter, gasket or tube sheet lights up exactly where it leaks.
Dust caked at a seal or a hopper backed up into the cartridges kills airflow and filter life. We change filters, fix the cause, and record a new pressure-drop baseline.
Compressor oil carried through the diaphragm valves glazes the filter media into a cake that will not release on the pulse. New filters will fail the same way until the air is fixed.
Put your collector on a schedule. Service contracts cover leak tests, DP logging, pulse-system checks and filter change-outs, with a written report every visit.
Price a ContractEvery service your blast or dust collection equipment needs — from the first inspection to the final leak test.
Wheels, abrasive mix, recovery and dust collection tuned together, so every plate comes out the same as the first one.
Enter your equipment details and get a transparent service contract price in 60 seconds. No waiting, no phone tag.
Blades, liners, filters, media, and more — ordered at standard pricing from every inspection report. Kathryn Bailey, Account Manager, handles every order personally.
Any make, any age. We swap tired wheel designs for current technology that throws more abrasive, wears slower and comes apart faster, without replacing the machine.
Get a complete comparison of blast wheel technologies for your machine: flow rate, velocity, wear-part cost and life, and change-out time, set against the cost of the upgrade and the downtime to install it. You see the value before you spend a dollar.
For the machine you run today or the one you are about to buy. An independent profile of cost per hour, production limits and equipment quality, regardless of brand. Usually done in under an hour.
We profile the details of each machine, choose the best performing abrasive, and analyze operating cost, production limits and equipment quality, regardless of the brand.Joe Craig, Blast Services Inc.
Also from BSI consulting: dust collector dust-loading calculations to support EPA and state air-permit applications, plus airflow, air-to-cloth and filter sizing reviews.
| We compare | Your machine | Quote A | Quote B |
|---|---|---|---|
| Compare any abrasive for performance & consumption | ✓ | ✓ | ✓ |
| Compare any blast wheel for flow rate, velocity & performance | ✓ | ✓ | ✓ |
| Production limit for your spec | ✓ | ✓ | ✓ |
| Operating cost per hour | ✓ | ✓ | ✓ |
| Wear-part cost & lead time | ✓ | ✓ | ✓ |
| Build quality & maintenance access | ✓ | ✓ | ✓ |
Structural steel, rail cars, trailers, heavy fabrications. BSI installs and starts up blast rooms and paint booths sized to your biggest part, then proves the airflow with an air study before we leave.
OSHA and the ACGIH Industrial Ventilation manual set minimum velocities; many owners choose more air for visibility and finish quality, so we size to your target. Budget-level estimate for planning. Final sizing depends on your site, door and crane access, media, coatings, and applicable OSHA and NFPA requirements. BSI confirms everything on site.
We are peening equipment engineers. We restore wheel and air peening machines to how they were designed to work, then reconfigure them when you add new parts: media, flow, velocity, coverage and controls.
The same operator course we teach on the shop floor, with Almen and saturation, media control and daily machine checks. Free for your team.
Important: Blast Services Inc. is not an FAA-certificated repair station and does not perform, approve or certify peening of aircraft parts. Our services and training cover peening equipment design intent, functionality, set-up and maintenance. Training is educational only and does not replace your approved specifications (such as AMS 2430/2432), customer requirements, Nadcap accreditation or your own qualified process controls. Each customer remains responsible for process qualification, part acceptance and regulatory compliance.
Joe or Kathryn will call you within 1 business day.